Dana 44 Disc Brake Conversion Kit: Upgrade Your Braking System Today

A Dana 44 disc brake conversion kit upgrades the braking system of a jeep or truck equipped with a Dana 44 axle. This kit replaces the drum brake system with disc brakes, which provide better-stopping power and improved performance in off-road conditions.

Dana 44 Front Axle Disc Brake Upgrade Kit

The kit includes:

  1. 12.5″ standard 3/4 ton truck rotors
  2. 3/8″ thick laser-cut brackets
  3. Standard duty JB6 3/4 ton truck brake calipers with steel pistons. Heavy-duty JB7 caliper upgrades are available.
  4. Caliper pins
  5. Set of four high-quality semi-metallic brake pads. Ceramic brake pads are available as an upgrade.
  6. Copper washers
  7. banjo bolts
  8. New inner hub/wheel seals
  9. Anti-rattle clips

All bolts are Grade 8, much stronger than the standard Grade 5 you find in most kits

Upgrading the disc brakes on your 1976 to 1979 Ford Dana 44 axle (8-lug axle) with a kit from Lugnut4x4 has a lot of benefits:

  1. 40lb weight savings
  2. Newer style brake calipers
  3. More clearance for wheels
  4. No problems with calipers falling out

While some exceptions apply, this kit clears most 15″ steel wheels with 3″ or less backspacing.

Please note: 3.25″ requires light grinding on the calipers; 3.5″ requires heavy grinding on the calipers; 4″ requires 1″ wheel spacers
The Dana 44 axle is used in a variety of jeep and truck models and is well-known for its durability and strength. However, the factory drum brakes that come with the axle can be ineffective, especially when driving off-road or carrying heavy loads.

A disc brake conversion kit replaces the drum brake system with modern disc brakes, providing better-stopping power, improved performance in off-road conditions, and less brake fade. The kit typically includes everything necessary to upgrade the braking system, including calipers, rotors, pads, and sometimes brackets or hardware. With a dana 44 disc brake conversion kit, drivers can enjoy improved safety and better driving performance.

Understanding Disc Brakes And Their Importance In Your Vehicle

Disc brakes are critical components of a vehicle’s brake system. They work by clamping down on a rotor, slowing or stopping the vehicle’s motion. Upgrading to a disc brake system from a drum brake system has many advantages, including less brake fade on long descents, reduced maintenance, and a higher quality, more effective braking system.

A disc brake system will generally perform better than a drum brake system. They’re less prone to overheating and more responsive to your touch. Hopefully, this brief overview has given you a better understanding of the importance of a disc brake system in your vehicle.

What Is Dana 44 Disc Brake Conversion Kit

Dana 44 disc brake conversion kit is an aftermarket upgrade that replaces drum brakes with high-performance disc brakes. The kit includes everything needed for the conversion, such as calipers, rotors, pads, and mounting brackets. With the conversion kit, jeep owners can enjoy improved stopping power, decreased braking distance, and better heat dissipation.

Upgrading to disc brakes will enhance off-road safety, stability, and control, particularly in wet and muddy conditions. The kit is also an excellent choice for those who tow heavy loads frequently. The conversion is designed to fit jeep wrangler, cherokee, and grand cherokee models equipped with a dana 44 axle.

Overall, dana 44 disc brake conversion kit is a must-have for jeep enthusiasts who demand the best performance from their vehicles.

Steps To Install Dana 44 Disc Brake Conversion Kit

The dana 44 disc brake conversion kit can be installed with the following preparation steps. Firstly, gather all the required tools and necessary parts. Then drain the brake fluid from the vehicle. Next, remove the old brakes and brake components.

After this, install the new disc brakes and calipers. Connect all brake lines and hoses, and fill the brake system with new fluid. Lastly, test the brakes to ensure they are functioning properly. To ensure proper installation, make sure to follow manufacturer instructions, double-check all fittings, and have a professional inspection.

It is essential to properly install the Dana 44 disc brake conversion kit for optimal vehicle safety and performance.

Maintenance Of Dana 44 Disc Brake Conversion Kit

Regular maintenance is essential for the longevity of your dana 44 disc brake conversion kit. It’s especially important to keep up with maintenance if you frequently take your vehicle on rough terrain. To ensure that your kit stays in top-notch condition, regularly inspect all components of the brake system for wear and tear.

Lubricate all moving parts and replace any damaged or worn components promptly. With proper maintenance, you can extend the lifespan of your dana 44 disc brake conversion kit. An added bonus of regular maintenance is improved braking performance. Follow these tips to make sure that your dana 44 disc brake conversion kit is in excellent shape and ready for your next adventure.

Frequently Asked Questions For Dana 44 Disc Brake Conversion Kit

How Much Does The Dana 44 Disc Brake Conversion Kit Cost?

The dana 44 disc brake conversion kit prices start from $400, depending on the brand and type.

Can I Install The Dana 44 Disc Brake Conversion Kit Myself?

Yes, you can install the dana 44 disc brake conversion kit yourself if you have basic mechanical skills and proper tools.

Is The Dana 44 Disc Brake Conversion Kit Compatible With All Vehicles?

No, the dana 44 disc brake conversion kit may not be compatible with all vehicles. Check the manufacturer’s compatibility list before purchasing.


Converting your dana 44 axle to disc brakes is one of the smartest upgrades you can make to your off-road vehicle. By upgrading to disc brakes you can dramatically improve your stopping power, especially when it matters most. Whether you’re driving on a steep hill or simply towing heavy loads, you will have the added security and peace of mind that comes with reliable and consistent braking power.

The dana 44 disc brake conversion kit is engineered to be robust, durable and effective, ensuring exceptional stopping power, even in the most extreme conditions. With the right kit and a few basic tools, you can easily install disc brakes on your dana 44 axle with minimal effort.

Overall, we highly recommend this upgrade to anyone looking to improve their off-road vehicle’s stopping power and performance.


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top